Tmt bar prices

Compare various TMT bar prices to find the best one for your project

Don’t settle for low-quality bars and educate yourself on what’s available in the market. Read till the end to know the different aspects of a good TMT bar and which ones to opt for depending on the nature of your construction.

When it comes to choosing quality TMT bars for your construction project, it makes sense to pick good quality ones that will stand strong and last long! There are so many people whose lives depend on you and the structure you build should no doubt be worth the amount you spend to construct it. But by picking the best without settling for low quality, you need not end up compromising on the budget of your choice. The best TMT bars need not be the most expensive! Read on to compare various TMT bar prices and pick the one within your price range that possesses the right chemical composition you require.

Be aware of the purpose you need the bars for

There are different bars for different purposes and depending on the purpose you require them for, you can choose the most appropriate ones. For example, It makes sense to opt for water-resistant bars if your construction site is close to a sewage plant. Choose highly ductile and durable bars if your project is a mall, bridge, or any other structure that will accommodate a lot of people every day. Pick earthquake and corrosion-resistant TMT bars if your high-rise building is near an earthquake-prone zone.

It always helps to make a list of factors beforehand and jot down your ideal budget allocation. By determining what purpose you need the bars for, you can pick bars of suitable chemical and physical compositions. This will help you get your money’s worth and determine your ideal TMT bar prices accordingly.

Get educated on the different types of grades available

One of the factors that set bars apart from each other is their grade. This implies the stress level number that was used to deform the bars into the desired shapes and sizes. This plays a vital role in determining the bar’s quality and how much load it can withstand. Keep an eye out for the grade of the TMT bars you choose, as they will give you an idea about how long-lasting your structure will be.

Types of bars available

It’s time to delve into the actual types of bars available, as we have already discussed the grades and compositions that can vary. Some of the main types include:

1. Fe-500D: Here, the Fe denotes iron, which was used to prepare the bars. The 500 is the minimum yield strength of the bars and the D is ductility. The ductility implies that these bars have higher percentages of elongation. The main advantages of these bars are their great bending ability and resistance towards dynamic loading. They replaced the Fe-415 grade TMT bars due to these reasons and are ideal for building bridges, tall buildings, and other concrete structures that will withstand a lot of footfall every day.
2. Fe-550: These bars are quite similar to Fe500 bars, except for their differences in tensile strength and yield capacity. They are mostly used for constructions that require underground environments and are exposed to coastal and marine zones. They are extremely water-resistant and can withstand a lot of corrosion effectively. Hence, they are ideal if your construction site is close to a lake, sewer, dam, or any other water body.
3. Fe-500: These bars are similar to Fe-500D bars that were mentioned earlier. What sets the two types apart is their ductility. While Fe-500D bars have ductility (as implied in the D), Fe-500 bars have low ductility. This makes their percentage of elongation very low (just 12%, while Fe-500D bars have almost 18%) and they may be unsuitable for large-scale projects. There is also a significant difference between their carbon content (0.25% in Fe-500D bars and 0.30% in Fe-500 bars). Be sure to know the scale of your project and the nature of the environment it is going to be constructed on. This will help you choose one of the two bars accordingly.
4. TMT binding wire: These wires are used to tie the TMT rebars together at their joints. This helps to hold their structure properly and in place.

Sizes of bars available

Once we are done with the major types of bars, it’s time to move on to the sizes available. Based on the project specifications, we can choose the sizes and types required, which will subsequently help us compare the TMT bar prices accurately. Some of the most common sizes of TMT bars available that will affect their varying price points include:

1. 8mm – 10mm: Ideal for slabs and stair ups for slab homes
2. 12mm – 25mm: Ideal for beams and columns for withstanding external loads
3. 32mm – 36mm: Ideal for complex projects such as bridges and dams\

Why should you choose iSteel for your next project?

The location of the manufacturer and supplier also matters while choosing your bars, as it will help avoid any last-minute requirements. You can get your supplies delivered quickly without expecting any extra travel time and expenses. What’s more, you needn’t worry about any unexpected requirements or needing a larger quantity of supplies while the project is ongoing smoothly.

When it comes to customizing your TMT bars at the prices you require, iSteel always has a wide variety of options available. Be it the type of bars you need, their sizes, or their chemical and physical compositions, we are sure to have several options for you to choose from! We always make it a point to deliver ahead of time and use the latest technology available for the best quality products. Be sure that the TMT bars you purchase from us will be ISI certified to guarantee superior quality.

Head over to our website to choose the ideal products for your specific needs at your preferred TMT bar prices and select a package that suits your ideal budget preferences!